www.bito.com Adjustment clip front • easy mounting without bolts • protects from injuries • used for straight flow shelves Price per piece Finish: galvanised S-VC1 Price per piece Material: Plastic, colour: black 36-12100 Ref.no. Ref.no. Adjustment clip rear • easy mounting without bolts • allows easy re-adjustment of universal divider Clip, complete (per unit) S-VC3 Push-back adjustment clip • suited for push-back applications S-VC4 Ref.no. Screw (per piece) S-VC3 36-17263 36-17262 A unit consists of clip, screw and ball Finish: galvanised, ball from plastic, colour: orange Price per piece Ref.no. Ball (per piece) Finish: galvanised 36-26640 Ref.no. Ref.no. In-feed guide Subdivides flow shelves into lanes • can be positioned in 8,5 mm increments • mounted at the replenishment side • length 200 mm Finish: galvanised Price per piece, including set screw The 200 mm long in-feed guide facilitates in-feeding and centering of storage units at the replenishment side and ensures an even spacing between the storage units on flow shelves without dividers. Adjustable on a 8,5 mm pitch. Suited for CLS-V system (Variant) Ref.no. Ref.no. S-ZB1 S-ZBK1 Suited for VDA/KLT system Picking tray divider Continues subdivision into lanes over the picking tray area • continues lane configuration of the flow shelf‘s straight part onto the sloped part of the picking tray • easy push-in fitting into the divider profile • length options 300 mm and 400 mm Used for cranked flow shelves as divider extension to continue lane subdivision over the picking tray area. This prevents that storage units are pushed sideways, thus avoiding picking mistakes. Finish: galvanised steel tube Price per piece Length 300 mm 400 mm Ref.no. S-FT300 S-FT400 43 Dynamic components S-VC1 Protective cap