www.bito.com E Make sure that the result is divisible by a pitch of 12,5 mm! Please note: The weight of the storage units may result in a deflection of the flow shelves‘ support sections of approximately 9-10 mm. = Spacing between straight and cranked flow shelves, parallel adjustment E = Height of storage unit + 90 mm rounded to the next increment Example: Height of storage unit = 200 mm 200 mm + 90 mm = 290 mm 290 mm 12,5 mm = 23,2 (24) E = 24 x 12,5 = 300 mm 90 mm including clearance Make sure that the result is divisible by a pitch of 12,5 mm! F = Spacing between straight and cranked flow shelves X = Y + 112,5 mm Refer to calculation above (example E) F = E + 112,5 mm G Result E + 12,5 mm = G = Spacing between flow shelves mounted in contra-flow direction (return lane) Refer to calculation above (example E) + 1 increment à 12,5 mm (for contra-flow inclines) G F Make sure that the result is divisible by a pitch of 50 mm! Calculation of frame height Minimum adjustment height C of flow shelf + spacing E, F, G (depending on flow shelf combination) + 6% incline (refer to calculation D) + height of storage units + 100 mm (beam height) Example (based on previous calculation examples): C= 365 mm 2xE= 600 mm 1xF= 412,5 mm 1xG= 312,5 mm Incline according to D = 87,5 mm Height of storage units = 200 mm Beam height = 100 mm Total 2.077,5 mm H H Please note: Maximum frame height 2.500 mm Maximum frame height 2.500 mm 2.077,5 mm 50 mm pitch = 41,55 42 x 50 mm = 2.100 mm 11