- Page 1
- Page 2 - Page 3 - Page 4 - Page 5 - Page 6 - Page 7 - Page 8 - Page 9 - Page 10 - Page 11 - Page 12 - Page 13 - Page 14 - Page 15 - Page 16 - Page 17 - Page 18 - Page 19 - Page 20 - Page 21 - Page 22 - Page 23 - Page 24 - Page 25 - Page 26 - Page 27 - Page 28 - Page 29 - Page 30 - Page 31 - Page 32 - Page 33 - Page 34 - Page 35 - Page 36 - Page 37 - Page 38 - Page 39 - Page 40 - Page 41 - Page 42 - Page 43 - Page 44 - Page 45 - Page 46 - Page 47 - Page 48 - Page 49 - Page 50 - Page 51 - Page 52 - Page 53 - Page 54 - Page 55 - Page 56 - Page 57 - Page 58 - Page 59 - Page 60 - Page 61 - Page 62 - Page 63 - Page 64 - Flash version © UniFlip.com |
www.bito.com
Adjustment notches at the flow shelves‘ front and rear edge help to realise an ergonomic grip curve
25 mm 14 x
1
Sturdy, bended profile. Adjustment notches at the front and the rear end help to realise an ergonomic grip curve at the picking face. Fitted to the uprights with the help of support clips. Finish: galvanised
3 6
25
mm
=3
9
S-SV1 S-SV2
50
mm
2 Cap for side section ends Prevents injuries from sharp edges.
1 5 10 11 8
7
Material: Black plastic 4 3 Push-in connector Joins front/rear beams with flow shelf side sections. With safety pin to prevent unhooking. Lefthand and right-hand version (type 1 and type 2).
2 S-KRS1 Finish: galvanised 7 Beam at rear Can be equipped with holders for product identification labels or lane marking. Accommodates adapters for roller track and divider fitting.
4 Front beam Increases flow shelf rigidity and serves as front stop at the flow shelves‘ picking face. Can be equipped with holders for product identification labels or lane marking. Accommodates adapters for roller track and divider fitting. Finish: epoxy coated 8 Picking tray Positioned at the picking face of cranked flow shelves and of straight flow shelves with inclined picking tray. Tray supports firm up the picking tray centre area.
Support section for cranked flow shelves Increases flow shelf rigidity and provides a seat for the rear end of the picking tray. Accommodates adapters for roller track and divider fitting. 5
6 „In-shelf“ support section Available in two finishes. Depending on loads stocked, C-profiles and PT-profiles are positioned individually or in groups as sideto-side support under the flow shelf. Please consider added height. Finish: galvanised 10 Roller track Equipped with cylindrical or flanged rollers. Cylindrical rollers are available in several versions with different load capacities and axles.
Finish: epoxy coated 9 Adapter Easy push-on fitting to the beams at the flow shelves‘ front or rear for mounting roller tracks and standard dividers. Adjustable in length direction on a 8.1 mm pitch. Material: Plastic
Finish: epoxy coated 11 Divider Subdivides flow shelf into lanes. Available in several versions to suit different applications.
Finish: galvanised
Material: Plastic rollers
Finish: galvanised
33
Dynamic components
Flow shelf components
1 Flow shelf side section
|