www.bito.com Reinforced base plate Finish: galvanised The reinforced base plate replaces the lower stiffening beam at the replenishment side. This is particularly useful, if the flow shelf is to be placed at a very low level. Including 2 floor anchors Ref.no. (per piece) 36-25678 Finish: galvanised Shims for reinforced base plate • for compensating floor unevenness • available in two material thicknesses: 1,0 mm and 2,5 mm 1,0 mm 2,5 mm PU = Packaging unit Material thickness 1,0 mm 2,5 mm Ref.no. (PU = 20 pcs) S-ULB1/20 S-ULB3/20 150 mm 65 mm Finish: epoxy coated RAL 5010 RAL 7035 Other RAL colours upon request. Stiffening beam • increases lengthwise bay rigidity • easy assembly without bolts • safety pins prevent unintentional lifting Including safety pins 6 mm upstand Profile PT 80S RAL 7035 36-26532 36-26536 36-26540 36-26543 Bay width 1.350 1.800 2.200 2.700 mm mm mm mm Please note: No load carrying capacity! Ref.no. (per piece) RAL 5010 36-26533 36-26537 36-26541 36-26544 80 mm Finish: galvanised Mono-post SF4 • height 2.504 mm Mounted in front of the frame and connected to the frame with two tie bars. 60 mm Including base plate and floor anchor Ref.no. (per piece) 36-24960 Finish: galvanised Tie bar • connects the frame with the mono-post placed in front • available in several lengths Delivery includes 1 fixing angle and 1 strut (U-section). Including fixing material Further lengths upon request. Length T2 1.011 mm 2.000 mm Ref.no. (per piece) 36-25124 36-25125 15 FLEX system • allows to leave out the lower stiffening beam