www.bito.com FIFO principle (first in – first out) In pallet live storage installations, goods stored first are taken out first. This allows easy control of sell-by dates as well as of production lots and series. BITO Upright adapter Flow shelf width = clear bay width -10 mm The upright adapters are bolted to the slot pattern at the front of your pallet racking uprights on a height adjustment pitch of 25 mm. The self-supporting flow shelves are seated on the support clips which are hooked into the upright adapters. Flow level spacing can be regulated on a 12,5 mm pitch. LIFO principle (last in – first out) In push-back racking, goods stored first are taken out first. Upon request, we also supply low-depth flow shelves to fit into push-back installations! Finish: galvanised BITO Upright adapter • height 1.950 mm Please make sure that the exact clear width between uprights is indicated in your order! Also check whether your existing racking installation can carry the additional load. Upright slotting to accommodate support clips 6 bolt fixings per upright adapter 25 mm 1 set = 4 pcs, including fixing material Ref.no. (per set) per piece, including fixing material 36-27955 36-23531 Ref.no. (per pce) BITO Universal support clip • provides a seat for flow shelves • no upright adapter necessary 50 mm Finish: galvanised BITO Universal support clip • suited for uprights of other manufacturers with a side perforation (ø11 mm) in 50 mm increments Please check whether your existing racking installation can carry the additional load. Ref.no. (per pce) S-PV1 Upright of another manufacturer 31