New Products EXCLUSIVE TO CONAC Conaform Lightweight formwork material Conaform is a sacrificial formwork material made from a flat steel wire mesh, with a “yellow” heat-shrunk layer of polyethylene applied to both sides of the mesh. Applications: The strength and versatility of Conaform make it the particularly useful for the following applications. • Ground beams • Footing and bases • Pile caps • Construction joints (stop ends) • Special shapes or curves • Void formation • Ribbed and Waffle slabs • Penetrations • Recesses • Temporary fencing • Safety screens • Many other unlimited applications BC Self Sticking Foam Joint for Slabs • Hold one stock line only • Will stick to itself so will not spring open. - 25 kg/m³ Conac Brick • 75 x 65 x 50 mm Conac Brick Concrete Spacer • 3 covers - 50, 65 & 75 mm • High Strength (65 MPA concrete) • Can use tie wire through hole to secure rebar Can thread tie wire through spacer www.synergysystems.com.au 57