54
>
Material Characteristics
Kinetex Particle
1.3 µm
1.7 µm
2.6 µm
5 µm
System Compatibility
UHPLC
UHPLC
UHPLC & HPLC
HPLC & PREP LC
Typical Efficiency (p/m)
> 400,000
~320,000
~280,000
~180,000
Typical Backpressure (bar)
> 400
> 400
200-350
< 250 bar
Verify that your getting
the best performance out of
your Kinetex column!
www.phenomenex.com/verify
Material Characteristics
Packing
Material
Total
Particle Size
(µm)
Pore Size
(Å)
Effective
Surface Area
(m
2
/g)
Effective
Carbon Load
%
pH
Stability
Pressure
Stability
Kinetex XB-C18
5
100
200
10
1.5 - 8.5**
1000/600 bar
Kinetex C18
5
100
200
12
1.5 - 8.5**
Kinetex C8
5
100
200
8
1.5 - 8.5**
Kinetex Phenyl-Hexyl
5
100
200
11
1.5 - 8.5**
Kinetex XB-C18
2.6
100
200
10
1.5 - 8.5**
1000/600 bar
Kinetex C18
2.6
100
200
12
1.5 - 8.5**
Kinetex C8
2.6
100
200
8
1.5 - 8.5**
Kinetex HILIC
2.6
100
200
0
2.0 - 7.5
Kinetex Phenyl-Hexyl
2.6
100
200
11
1.5 - 8.5**
Kinetex XB-C18
1.7
100
200
10
1.5 - 8.5**
1000 bar
Kinetex C18
1.7
100
200
12
1.5 - 8.5**
Kinetex C8
1.7
100
200
8
1.5 - 8.5**
Kinetex HILIC
1.7
100
200
0
2.0 - 7.5
Kinetex Phenyl-Hexyl
1.7
100
200
11
1.5 - 8.5**
Kinetex C18
1.3
100
200
12
1.5 - 8.5**
1000 bar
**Columns are pH stable from 1.5-10 under isocratic conditions. Columns are pH stable 1.5-8.5 under gradient conditions.
2.1 mm ID Kinetex columns are pressure stable up to 1000 bar.
When using Kinetex 1.3 µm or 1.7 µm, increased performance can be achieved, however high pressure-capable instrumentation is required.
Terms and Conditions
Subject to Phenomenex Standard Terms & Conditions, which may be viewed at www.phenomenex.com/TermsAndConditions.
Trademarks
Phenomenex, Kinetex, Clarity, and Strata are registered trademarks of Phenomenex. Axia, Aeris, Oligo-MS, MidBore, Phenex, SecurityGuard, and Sure-Lok are trademarks of
Phenomenex. Waters, ACQUITY, UPLC, Symmetry, and XBridge are registered trademarks, and BEH Technology, OBD, and SunFire are trademarks of Waters Corporation. Agilent,
ZORBAX, and Poroshell are registered trademarks of Agilent Technologies, Inc. API 3000, API 4000, and API 5000 are trademarks of AB SCIEX Pte. Ltd. AB SCIEX
TM
is being used
under license. HALO is a registered trademark of Advanced Materials Technology, Inc. Inertsil is a registered trademark of GL Sciences, Inc. Ascentis is a registered trademark of
Sigma-Aldrich Biotechnology LP and Sigma-Aldrich Co. Shimadzu and Nexera are registered trademarks of Shimadzu Corporation. JASCO is a registered trademark of JASCO
Corporation. PEEKsil is a trademark of SGE. NUCLEOSIL is a registered trademark of Macherey Nagel. Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany.
Disclaimer
Phenomenex is not affiliated with Agilent Technologies, Advanced Materials Technology, Inc., Sigma-Aldrich Biotechnology LP and Sigma-Aldrich Co., JASCO Corporation, Waters
Corporation, SGE, or U.S. Silica Co.
Comparative separations may not be representative of all applications.
SecurityGuard is patented by Phenomenex. U.S. Patent No. 6,162,362. CAUTION: this patent only applies to the analytical-sized guard cartridge holder, and does not apply to
SemiPrep, PREP or ULTRA holders, or to any cartridges.
The opinions stated herein are solely those of the speaker and not necessarily those of any company or organization.
© 2014 Phenomenex, Inc. All rights reserved.
Phenomenex
l
WEB: www.phenomenex.com