18
customisation
options
Parvalux motors and gearboxes can be customised to the exact needs
of the application. Increasingly, we are providing geared motor units
with extra components specifi ed by customers in order to provide a
complete sub-assembly, saving both time and cost. Some of our many
options are described below. If the option that you are looking for is not
shown, please do not hesitate to contact us to discuss we may well have
a solution that meets your needs.
Connector
We can fi t a huge range of connectors or crimps to our motor cables
according to your specifi cation.
Brake
We provide a standard range of high-quality spring applied brakes to
provide either static-holding or dynamic braking. Our standard ranges
from 0.4Nm 1.0Nm operating on a low voltage DC supply. Alternative
brakes are available on request.
Encoder
We provide a standard range of HEDS compatible dual channel encoders
offering 200 120CPR output (00CPR as standard) with index pulse.
These high-performance encoders are mounted to the rear of the motor;
however, we are also able to provide custom-specifi c mounting on the
gearbox output shaft. If an alternative style of encoder is required,
we are happy to source an alternative or provide a custom-specifi c
solution.
Terminal box
We offer a die cast terminal box (Ingress Protection IP4) for motor
and brake connections with the PBL60 and PBL86 models, which is
suitable for cable diameters up to 10mm (motor phases) and 7mm (Hall
sensors). Includes 6-way AMP connector fi tted to Hall effect sensor
leads, earth screw for cable screens and two rear facing cable glands.
Can be supplied with screened fl ying leads.
Bespoke solutions
As well as providing a large range of design options based on customising
existing designs, we are able to provide bespoke solutions (out-and-out
specials) for medium high volume applications. In such cases our
in-house design team are able to model new designs to allow rapid
prototyping and test. With a strong design element as well as modern
manufacturing and low cost supply chain, we are often able to provide
cost-effective solutions quickly.
Paint fi nish
Standard paint fi nish is Parvalux blue applied to induction, series wound
and permanent geared motors. Planetary geared motors are powder
coated blue and DC brushless motors are painted black. Alternative
paint colours are available on request.
Shaft
Motors are supplied with double ended shaft as standard or single
ended shaft as an option. A blanking plug (3mm extra length) can be
supplied fi tted in the rear shaft hole on PBL60 and PBL86 motors with
single ended shaft. In addition to the standard gearbox shafts shown
in the catalogue, we can produce special keyways, fl ats and other
special fi ttings to specifi c requirements. Shaft material as standard is a
carbon-steel, alternative materials can be requested.
M3P
3 point fi xing option
See page 7
S3P
3 point fi xing option
See page 7
Incremental encoder
pictured with PBL60
See page 60
1.0 Nm holding brake
pictured with PBL86
See page
MF
fl ange option
See page 8
Terminal box
pictured with PBL60 and
3mm blanking plug
keyway
threaded
fl at
v-belt
cross-hole
splined
timing belt
gear