www.barncosales.com.au
MINCINg PoINTErS
alWaYS
Keeptheplate&knifeasamatchedset.
Keeptheplate&knifesharp.
Checkforlevelnessbylayingtheknifeon
the plate before inserting in the machine.
Keepplates&kniveslubricatedin
storage and when starting up the machine.
Use a coolant when sharpening plates.
Inspect the plates making sure all holes
are clear- that there are no cracks.
CallBarncoforallyourmincerneeds!
SaFETY
· Alwaysinspectpartsforcracks,heatfractures,
discoloring. Never run on parts that have these
defects.
· AlwaysuseO.S.H.A.lockouttagoutprocedures
whenchangingknivesandplates!
· Alwaysweargloveswhenhandlingknivesand
plates.
· Neverrunplatesbelow minimum thickness.
· Customerisresponsibleforsafety,installation
and operation of equipment. It is the responsibility
of the user to comply with all O.S.H.A.(Occupational
Safety and Health Administration) or A.P.H.I.S.
(Animal and Plant Health Inspection Service)
regulations.
IMPorTaNT!
uSE KNIFE aNd PlaTE TogETHEr
Always use the same knife and plate together. If
one has gradually worn away from perfect level, the
other will have worn with it. As a result they may still
be used together. If, however one is matched with
a different member which is ground true, the set will
certainly not turn out a good product. In addition,
such practice will probably break the new member,
as indicated in drawing.
NEVEr
Nevermixdifferentknivestodifferentplates.
Never over tighten the main barrel nose
retaining ring on the machine.
Never run the grinder/mincer without product.
Product is the natural lubricant. Heat can
build up so fast that cold product could crack
the plate.
Never hit the plate against anything to clean
the holes.
Never throw the plates or knives.
NevercallanyoneexceptBarncoforyour
mincerneeds!
Themeatmincerisacriticalpointofanyoperation.Yourproductiseithercutcorrectlyorruined!Thewordiswatchyour
cutting tools and the machine. A few small preventive measures can give you consistent quality and production day in and
day out. If your product doesn't flow freely from the head, looks pale or dead, rolls back up in the entrance hopper and
temperatureisincreasing,callBarnco!Wecanhelpyouobtainthehighestquality,thebestproductdefinitionandthegreatest
productionrateswiththelowesttemperatures.Guaranteed!
MACHINE PARTS
B55