Patented Locking System
For Quick Blade Replacement
E-Z Burr's patented blade locking system lets you change blades in seconds,
with the tool still in the machine. All it takes is a one-eighth turn.
To Remove the HSS Blade
To Replace the HSS Blade
Insert the tab at the end of the blade
into the groove of the adjusting
screw. Lower the slot of the blade
over the lock screw.
Lock the flex arm into place with
a simple 1/8 clockwise turn of the
locking screw.
Unlock the blade with a simple 1/8
counterclockwise turn of the
locking screw.
Once in the unlocked position the
blade can be pulled up and out of
the holder.
12