WOOD CARE IN A SYSTEM
Consumption:
20 m
2
/ltr
1
2
3
4
www.isopaint.com
MAINTENANCE AND REPAIR OF OILED WOOD FLOORS
Iso Paint Nordic has made a second generation of the Mainte-
nance Oil in order to improve the protection of oiled wooden floors.
The Maintenance Oil is generally suitable for all oiled and oil waxed surfaces includ-
ing UV-oiled floors.
PROTEGO MAINTENANCE OIL
is used for repair of UV-oiled floors. The Maintenance Oil saturates the wood at the
damaged area and re-establishes the protective surface. Maintenance Oil White is
mainly used for light wood species and Maintenance Oil Natural for dark wood spe-
cies.
Work Instruction
1. Sand down the damage to be repaired carefully with sanding paper and make
sure to choose the correct grit depending on the depth of the scratch. Final sand-
ing is made with grit 320.
2. Stir the maintenance Oil carefully before use. Apply the maintenance Oil with a
brush only onto the area that was previously sanded down.
3. Leave the maintenance Oil to be absorbed for app. 20 min. Remove excess oil
cautiously with a piece of cloth. The area should appear oily wet, and do not pol-
ish to hard on repaired area.
4. Let the oil harden for app. 1 1/2 hours and buff with the white polishing pad.
Application of maintenance Oil may be repeated as described above including the
time interval if area is not saturated with oil.
STRONG ADVANTAGES
Maximum protection Suitable for all
oiled and oil waxed surfaces Espe-
cially well suited for UV oiled floors
(factory oiled floors) Quick and easy
application Available in Natural and
White
Should the repair area not yet be completely saturated with oil after the first treatment, apply one more coat of Maintenance Oil. Leave
the repair area to harden and do not expose to water for 24 hours. Only then the oil is hardened. Notice! Oil wetted cloths, paper, and
pads should be burnt after use or disposed of otherwise risk of self ignition.