art.1(2), and they must not be put into service until the machinery into which they are to be incorporated, has been declared in conformity with the provision of art. 4(2), annex II(B) of Machinery Directives 98/37/ CEE/22.6.98 and for Italy only, of DL 459/24.7.96. position complies with the order. The nameplate reports such information. Check mounting stability to ensure the unit runs without vibrations or overloads. The unit must be stopped as soon as defective running or unexpected noise occur, remove the faulty part or return the unit to the factory for checking. If the faulty part is not replaced, other parts can also be affected, causing more severe damage and mak- ing the identification of initial cause more difficult. at maximum load for the first 20-30 running hours to allow the proper running in. The gearboxes are delivered already filled with long-life synthetic oil and, in case of replacement or top- ping, do not mix with mineral lubricants. Never hoist on any moving part. grease on oil seal lips. products: - scraped components of the units to be delivered to authorized centres for metal object collection; - oils and lubricants drained from the units to be delivered to Exhausted Oil Unions; - packages (pallets, carton boxes, paper, plastic, etc.) to lead into regeneration/recycling circuits as far as |