9 SECTION ENGINE engine oil pressure tester Model No. Description • Designed to Check Engine Oil Pressure in Both Cars & Trucks • Easy to Read Dual Scale Gauge • Complete with 24” (600mm) of Oil Proof Hose with 1/8” NPT • Also includes 1/4” NPT & 3/8” NPT Adaptors • Dual Gauge Readings: 0 to 300psi (0 to 21 Bar) • Gauge Diameter: 2.5” SP66070 COMPRESSOR ENGINE HEAD & VALVE Compressed air adaptor Model No. Description • Holds the valves closed whilst spring is compressed • Requires a 90-125psi air supply • Spark plug adaptor with M14 and M18 threaded fittings for car and light commercial use SP66110 Bar type valve spring Compressor Model No. Description • Easy removal of colletts, retainers & valve springs • Locks onto overhead valve rocker stud • Universal application • Use with or without removing cyclinder head SP66010 sCreW type overhead valve spring Compressor Model No. Description • Easily remove valve springs on most cars & light trucks • Works with cylinder head on or off the engine • The jaws grip the valve spring in parallel compression SP66012 valve spring Compressor Model No. Description • Suitable for use on multi valve petrol and diesel engines with deep-seated valves • Universal jaw with 55-175mm capcity and 165mm throat depth • Suitable also for general use on OHC, OHV and CVH engines • Reversible jaw and adaptor • Twin cam action permits use from above or below valve • 2 Valve spring sizes 25mm and 30mm SP66015 valve lappers Model No. Description • Small cup diameters 5/8” and 13/16” • Large cup diameters 1-1/8” and 1-3/8” • Hand grind small & large flat head unslotted valves • To use, place grinding compound on valve face and put in seat SP66115 178 SP Tools Catalogue, © Copyright 2014 www.sptools.com