ELECTRICAL 9 3/8” dr oxygen sensor soCket • Applications include Mitsubishi, Nissan, GM,and the Volkswagon Audi Group • For heated & non-heated lambda sensors SECTION SENSOR SOCKETS Model No. Description • 3/8”dr x 22mm x 90mm long • Window in socket allows the wires attached to the sensors to be bypassed • • SP64060 3/8” dr oxygen sensor soCket Model No. Description • Includes 29mm pressure/vacuum switch socket, 7/8” vacuum switch socket, 27mm oil pressure sending unit socket, 1” & 1-1/16” oil pressure sending unit socket, long oxygen sensor socket & short oxygen sensor socket • 7 Pcs • Window in socket allows the wires attached to the sensors to be bypassed • Applications include Mitsubishi, Nissan, GM,and the Volkswagon Audi Group • For heated & non-heated lambda sensors SP64065 BATTERY TOOLS Battery load tester Model No. Description • American style drop tester. Load applied by internal switchgear (non-sparking) • Suitable for 6 and 12 volt batteries • Applies load across cells and measures output on meter • Accurate indication of battery voltage, faulty cell and short circuit SP61009 WARNING: Batteries contain corrosive liquid. Always wear approved gloves and goggles when handling batteries or battery acid. If battery acid contacts skin, wash off immediately and contact a doctor for further advice. hand-held reFraCtometer Model No. Description • Accurate concentration check of battery fluids, antifreeze liquid & cleaning fluids • Suitable for ethylene & propylene glycol coolants • Ethylene Glycol: -60°C- 0°C • Propylene Glycol: -50°C- 0°C • Battery Fluid: 1.15 – 1.30 Specific Gravity • Automatic temperature compensation • Easy to read scale SP61005 Battery Fluid hydrometer Model No. Description • Test specific gravity of battery fluid • Floating module indicator specific gravity charge • One piece rubber bowl • Flexible neoprene tip SP61002 https://www.facebook.com/sphandtools SP Tools Catalogue, © Copyright 2014 169