Universal Lock Out
Tool System
The Universal Lock Out Tool system has been specifically designed to
open all domestic and European manufactured vehicles in the event
that access cannot be gained using conventional methods.
Part no. 5000 Universal Lock Out Tool Set
MS Windscreen Adhesive
HIGH TECHNOLOGY MS HYBRID POLYMER
Part No. 00.043 Windscreen adhesive
HBC MS Windscreen Adhesive is a high quality 1 part Adhesive Sealant
based on MS Polymer especially developed for direct glazing applications
in the Transportation industry.
It is an innovative fast curing high tack and high green strength formulation for
bonding windows in cars, buses, trucks, marine and rail applications.
HBC MS Windscreen Adhesive provides rapid processing time in manufacturing
applications where items have to be moved immediately or shortly after
application.
HBC MS Windscreen Adhesive provides fast drive-away time for bonding of
windshields in cars having gained NCAP Certification - 60 Minute Drive away*.
HBC MS Windscreen Adhesive can also be used in seam sealing, panel bonding,
overlaps and joints as well as applications in construction machines, excavators, loaders,
ventilation, air-conditioning, container construction and electro-technology applications.
· 1-component
· Easy processing
· High Green Strength
· Very high mechanical cohesiveness & fast curing
· Easy processing and adhesion without adhesion
promoter in many applications
· Free of solvents, isocyanate and silicones
· Very low shrinkage
· Bonds without primer on UV protected ceramic
coated glass
· Very good UV, weather & ageing resistance
· High resistance against aliphatic solvents, oils, fat,
watered inorganic acids & alkalines
· Can be applied to moist surfaces
· Nearly odourless & cures without bubbling
· Paintable - can be painted wet on wet
· High elasticity between -40°C to +120°C
· Suitable for powder or thermo varnishing applications
with a short-term resistance up to +200°C
· Non corrosive on surfaces -
no contact corrosion
· Low electrical conductivity
· Shock-proof, anti-vibration (shock-
absorbent) & noise dampening
· Resistant to thermal expansion &
contraction to material stress
· Easy clean-up formula
· Can easily be extruded with a hand, air
or battery gun at temperatures between
+5°C to +40°C.
· Suitable for: Steel, aluminium, alu-
anodized, brass, glass, ceramic coated
glass, acrylic glass, ceramics, stone,
concrete, ABS (possible primers) PBT, PVC
hard and soft, PPE, PA6.6-30,EPDM, GFK,
wood, powder-coated, vanished, galvanised,
Part No. 00.043 Windscreen adhesive
W
in
ds
cr
e
e
n
r
e
pl
a
c
e
m
e
nt
D
76 - 77