00.014 Leather Crack filler 60ml.
00.018 B Compound 60ml
00.013 Palette knife
Handling and Application
The Leather crack filler paste contains approximately
30% water, which means that when the product is dry,
the volume of the product will have diminished by
30%. Consequently, deep scratches will probably
have to be refilled once more. The adhesion of a
filler is depending on the thickness of the product.
The thinner the product, the better the adhesion.
The thicker the worse the adhesion. You can
sand B leather crack filler with fine sanding
paper (P320-P400) before adding the final
colour on the filled scratch.
Vinyl repair glue System B
B Compound
Leather repair System B
B Leather Crack filler
B Compound is a water based flexible acrylic
leather filler for holes in leather and vinyl.
Must be over coated with water based or
solvent based leather coating. Resistant to
common used leather cleaner and protection.
Curing time:
Dust-dry after approx. 1 minute by heating
at 140 degrees. Set to touch when cooled
down.
Handling and Application
Clean the area with plast cleaner part no.
00.039. Fill the damaged area with B
Compound using the palette knife part no.
00.013. Apply a mouldmaker copy on top of
the wet glue. Use the heat sealing iron on the
mould from Mouldmaker part no. 00.021 and
heat the product until it is melting. Cool down
with cooling bag part no. 00.007 and carefully
remove the mould.
P
la
st
ic
, Le
a
th
e
r
a
n
d
Vi
nyl
B1
Leather Crack filler from system B1
Part no. 00.014
B Leather crack filler is a water based
acrylic paste that fills out scratches in leather
or any part of that grain that is missing.
- Flexible filler, fast drying, easy to sand.
- Can be over coated with water based and
solvent based leather coatings.
- Resistant to common used leather cleaner
and protection
Drying time : 4 hours
Dust-dry after approx. : 30 minutes
Set to touch after approx. : 15 minutes
Sandable after approx. : 4 hours
28 - 29