5
FEATURES
1. Combines the features of an expansion joint and adjustable spout
end, making it easier to install.
2. Oversized receiver accepts downspout without welding. This
assures proper alignment with downspout. Eliminates need for
precise cutting and anging, reducing installation time.
3. The receiver has four ow outlets and the internal divider directs
the ow of material to one or more of the four outlets. Ba es are
angled, which regardless of angle of entry will facilitate emptying
of unit.
4. Receiver and ba e adjust with hood creating greater opportunity
to create a cushion pile regardless of ow rate or angle of incoming
spout.
5. Heavy duty construction. Receiver unit is 1/4" thick. Adjustable
is 7 gauge carbon steel construction with 7 gauge AR steel wear
plates. Square to round outlet transition is 7 gauge.
6. To be used in the spouting of clean dry grain and feed pellets. Not
to be used with sun owers, soybean meal, molasses feed and
other non free- owing items. For non free- owing items use low
pro le adjustable.
Incoming Spout Run
12 ga. Expansion Joint Weather Cover
Incoming Spout Stop
Receiving
Sleeve
1/4" Wall
Thickness
7 ga. AR Steel
Wear Plate
22"
or
23"
w
e
i
V
p
o
T
w
e
i
V
m
o
t
t
o
B
Cut Away to
Show Ba e
Opening 2
Opening 1
Opening 3
Opening 4
Ba e controls grain
ow for desired
sequence of ow
through holes 1-2-3-4
PREMIUM ADJUSTABLE SPOUT END WITH EXPANSION JOINT
Patent #6,691,852
This pamphlet deals only with grain velocity. Proper sizing and alignment of spout may be even more important but
are not the subject of this pamphlet. Grain spouts are only a small part of the total grain handling system and
responsible for a small part of grain damage and it would require a book to cover everything involved.